ProFusion X/XS

• Check the front panel for messages regarding error codes, muted zones, or dayparting events. If your player has a display, verify that the display shows a song name, artist name, or program name on the screen as it is a good indicator that music is playing normally.
• Power cycle the player. Confirm that the POWER indicator light is lit to ensure that the player is receiving power.
• Verify that the music player isn’t muted. If applicable, look for any indicators that your player might be muted or have its volume turned all the way down.
• Verify your audio cable(s) are securely connected to the appropriate audio output zones on the music player.
• Verify the other end of the audio cables are securely connected to the appropriate input zones on the music amplifier (varies based on model).
• Verify the sound system components (amplifier, mixer/processor, etc.) are turned on and receiving power.
• Verify the volume level on the sound system equipment (including wall volume controls, if present) is turned up to an appropriate level.
• Confirm the status of indicator lights on the amplifier and sound system equipment (ex. PROTECT, PEAK, PWR). If the PROTECT light is on, this could indicate a wiring issue in your sound system.

The Profusion X(S) has two red arrow buttons on the left side of the player to change the program.

• First, use the white up/down arrows to change the Zone displayed on the front panel.
• Once the appropriate Zone is selected, use the red up/down arrows on the left side of the screen to select a program. Press the * button to make a selection.